產品

平面往復式自動噴塑烘道流水線：

1、用于剎車片等汽摩配產品及金屬件規則產品的自動噴塑處理。

2、主要由噴塑臺、烘道、傳動座、往復機等組成。

3、前處理好的產品上件后經過靜電除塵，到達噴房，由電子眼掃描檢測后往復機上的噴槍開始沿 前后方向往復對產品進行噴涂，噴涂完后經傳送帶輸出噴房到烘箱內烘干固化。整線全自動操作， 人工操作極少并且產量大。

1、For automobile and motorcycle brake pads and other products and metal products processing rules.

2、Mainly by spray units, bake, anti-static belt, driving seat, reciprocating machines and other components.

3、Pieces after the pre-treatment after a good product electrostatic dust, spray booth arrive after detected by the electronic eye scan reciprocating machine gun began spraying the product back and forth along the forward and backward directions, spray after spray booth output via a conveyor belt into the oven drying cured. The entire line automatic operation, manual operation and yield little.